JUKI RS-1XL Smt Line Pick And Place Smd Machine
RS-1XL is for everyone who wants to assemble larger circuit boards
The RS-1XL combines the advantages of the RS-1 and RS-1R with the possibility of assembling printed circuit boards up to 560 mm wide (for comparison RS-1 / RS-1R: max. Width 370 mm). With slightly larger dimensions than an RS-1, the RS-1XL offers the same advantages: fast assembly of the smallest chips (0201 metrics) to large components of 50 x 150 mm or 74 mm edge length for square components. The machine combines the properties of a chip shooter with a mounter for large components. There is no need to purchase a special machine type.
JUKI Pick and Place Machine
- A new generation of electrical feeders of the type of RFAs with the normal RS-1 / RS-1R, the RF feeders are used with the RS-1XL. Due to its compact design, up to 112 feeders can be used on the machine.
- Larger board widthThe RS-1XL processes circuit boards up to 650 (length) x 560 mm (width) in size. There can be 3 circuit boards in the machine, one in the waiting position at the entrance, one in the assembly, and one in the exit. This optimizes cycle time.
- High flexibility – chip shooter and mounter in one machineThe RS-1 family features the unique TAKUMI (Japanese for “master”) placement head. In the case of small components, this lowers down to a distance of 1 mm onto the circuit board. This minimizes the travel of the individual placement heads (8 pieces) and enables the decisive speed advantage when assembling the smallest components, which are usually represented in large numbers on the circuit board. For larger components, the TAKUMI placement head increases the distance to the circuit board. The setting at which height the placement head is located is determined by the opting algorithm in the programming software. With several RS-1 machines in a line, in particular, the components on the circuit board are always used to optimize the machines so that they are fully utilized with the fastest possible assembly.
JUKI Pick and Place Machine
Advance chip mounter
Fast & flexible pick and place machine
Multi-functional SMT placement
Fast flexible pick & place machine
Board Size
max. 650 mm × 560 mm (single clamping)
Component Height
25 mm
Component Size
0201*2 (metric) ~ 74 mm / 50 × 150 mm
Placement Rate
Nach IPC9850:
29,000 CPH
Placement Accuracy
± 0.035 mm (Cpk ≥ 1)
Feeder Spaces
max. 112*3
Power Supply
200 – 415 V, Dreiphasenwechselstrom
Apparent Power
2.2 kVA
Operating Air Pressure
0.5 ± 0.05 MPa
Air Consumption
max. 50 L / min
Machine Dimensions (W × D × H)
2,109 × 2,000 × 1,490 mm
Mass (approximately)
1.85 t
*1 250 mm conveyor extension required.
*2 Ask for availability.
*3 When using RF Feeders on front and rear.
Please refer to product specifications for details.
Specifications and design are subject to change without notice.
Reviews
There are no reviews yet.